Add to collection
  • + Create new collection
  • Sound is a form of energy that is caused by the vibration of matter. Sound is transmitted through waves, which travel through solids, liquids and gases. We are most used to the sound travelling through air, but sound is able to travel faster and further in solids and liquids.

    ‘Seeing’ sound

    If we could see the molecules that make up the air around us, we would see sound as a series of more and less dense areas of air that are moving away from the source of the sound at about 340 metres per second. We say sound is a wave because the air molecules move back and forth while the sound travels along. The air behaves much like a longitudinal or compression wave on a spring.

    It is difficult to draw compression waves, so waves are generally represented as transverse waves for simplicity. The dense areas of the compression wave are the peaks of the transverse wave and the sparse areas are the troughs.

    Microphone – transforming sound energy into electrical energy

    In order to visualise a sound wave, we can use a microphone to transform sound energy into electrical energy. A simple microphone is made up of a very thin membrane with a coil of very fine wire attached. A magnet is positioned so that it is just inside the coil of wire but not touching it. When a sound wave strikes the membrane, it jiggles (vibrates) back and forth because of the high and low pressure areas of the wave. This causes the coil to jiggle, and when a coil moves in a magnetic field, an electrical current is produced. If we look at the electrical current using an oscilloscope, we can see the sound as a series of peaks and troughs.

    The sound from single pitch or note will make a simple sine wave on the screen. The wave will change as you change the volume or pitch of the note.

    Related content

    This article is part of an article series:

    with the accompanying investigations:

    Additional articles and activity ideas

    Find out more about studying sound under water and read about what is needed for sound to be heard, and how sound travels through water to understand some of the key science concepts.

    Investigating waves and energy uses slinkies to explore longitudinal and transverse waves.

    Make and use a hydrophone explains how to construct an underwater microphone.

    Sound on an oscilloscope uses a computer’s microphone to create a visual display.

    The PLD article Physical World – Sound curates Hub resources for the early years through to year 10.

    Visit the sound topic for additional resources.

      Published 12 September 2019 Referencing Hub articles
          Go to full glossary
          Download all